We are Authorised Dealer, Supplier, Service Provider of Medium Duty Lathe Machines, and our set up is situated in Pune, Maharashtra, India.
- Spindle bore 80 mm
- Full norton gear box.
- Double Screw with Full Norton Gear Box.
- Height of Center 10"
- Bed : Bed and all Casting Parts are manufactured in our Foundry. The Bed is made from A graded Casting 2V and 2 Flat type. Hardened and Ground Bed ways.
- Head Stock : Head Stock Body is of latest specially design induction hardened and Ground spindle of special alloy steel. All centrifugal running parts are well balanced.
- Apron and Norton : A four walled closed type with oil bath apron and norton having a best quality gears. Sliding and Surfacing feeds can be engaged by tightening a star knobs and engaging lever at appropriate position.
- Tail Stock : Hexagonal shapped body. Tail Stock spindle having external and internal grinding with MT-4 Internal Tapper is provided. It can be off set for tapper turning.
- Model Nos. as BM-4.5 and BM-6
|Length of Bed||41/2'||(1375 mm)||6'||(1825 mm)|
|Height of Center Over Flat Bed Ways||9″||226||9″||226|
|Maximum Swing over bed||17″||432||17″||432|
|Maximum Swing over Cross Slide||11″||280||11″||280|
|Maximum Swing in Gap||26″||660||26″||660|
|Admit Between Centre||18″||457||36″||915|
|Spindle Nose||6 TPI||6 TPI|
|Number of Spindle Speed||6 Range||6 Range|
|Diameter of Hole Through Spindle||2 1/16″||52||2 1/16″||52|
|Inch Range Threads||4 to 60 TPI||4 to 60 TPI|
|Metric Range Threads||0.5 to 7.5 mm||0.5 to 7.5 mm|
|Lead Srew Dia. & Pitch||1.1/4″||31.75||1.1/4″||31.75|
|Feed Shaft Dia.||7/8″||22.22||7/8″||22.22|
|Tail Stock Spindle Dia.||1.3/4||44.45||1.3/4||44.45|
|Tail Stock Spindle Taper Bore||MT-4||MT-4|
|Tail Stock Spindle Travel||5.1||130||5.1||130|
|Power Required||2 H.P. 1440 RPM||2 H.P. 1440 RPM|
|Approx Weight||625 Kgs.||750 Kgs.|